ENGINEERING METROLOGY TOOLBOX  
 Selected Publications 

Selected Publications is a web-based collection of publications about dimensional metrology.

Download Free Acrobat Reader
PDF Icon

Measurements of Cylindrical Standards; NBSIR 73-136; 1973


Veale, R.

NBS Internal Report 73-136; 22p. March 14, 1973.

Keywords:
Calibration; cylinders; rolls; plug gages; wire standards.

Abstract:
Cylinders are widely used in industry and standards labs as a form of length transfer. The measurement algorithm used by the dimensional metrology section to determine the diameters of master cylinders is given in detail. It has been found that a mechanical transfer from interferometrically measured gage blocks is the most satisfactory method.


Return to Top of Document

Web Site Home: Engineering Metrology Toolbox
Technical Inquiries: Daniel S. Sawyer, Group Leader
Dimensional Metrology
Engineering Physics Division
Physical Measurement Laboratory
NIST, 100 Bureau Drive, Stop 8211, Gaithersburg, MD 20899-8211

The National Institute of Standards and Technology (NIST) is an agency of the U.S. Department of Commerce.
NIST / PML / Engineering Physics Division

NIST Program Questions: Public Inquires Unit
(301) 975-NIST (6478) TTY (301) 975-8295
NIST, 100 Bureau Drive, Stop 3460, Gaithersburg, MD 20899-3460

Privacy Policy / Security Notice / Accessibility Statement / Disclaimer / Freedom of Information Act (FOIA) / 
Environmental Policy Statement / No Fear Act Policy / NIST Information Quality Standards / Scientific Integrity Summary

Date Created: Friday, October 18, 2002
Last Updated: Wednesday, December 28, 2011
Technical Web Site Questions: Jay Zimmerman
Feedback and Comments: Webmaster